scroll down

Machine Screw

Machine Screw

Machine Screw

Machine Screws are precision-engineered fasteners designed to be driven into pre-tapped threaded holes or mated with corresponding hexagonal nuts.

Head StyleHex head
Hex washer head
Pan head
Truss head
pancake head
Flat Countersunk head
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Customize coating
Size&Length#6~5/16 X 3/8"~4"
(M4~M8 X 10mm~100mm)
Standard:IFI, ANSI, ASTM, DIN, AS3566

 

Able to manufacture according to the customer's drawings and requirements. Please refer to the respective tabs for more information.✨

Pan Head

Pan Head

The Pan Head Machine Screw unites the generous bearing surface of a broad pan head with high-tolerance, standardized machine threads. Its slightly domed head geometry evenly distributes clamping loads across a wider plane, delivering high joint clamping power for non-countersunk assemblies without crushing, cracking, or deforming sensitive sheet metals, plastic housings, or delicate components.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M4~M8)
Length: 3/8"~4" (10mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Hex Head

Hex Head

The Hex Head Machine Screw features a standardized external hexagonal head designed for efficient high-torque tightening with a wrench or socket. Its six-sided geometry provides secure tool engagement, allowing greater tightening force and reliable clamping performance for machinery, equipment, and general mechanical assembly applications.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M4~M8)
Length: 3/8"~4" (10mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

 

Hex Washer Head

Hex Washer Head

The Hex Washer Head integrates the high-torque drive capability of a standard hex head with an integrated washer bearing surface. This structural design effectively distributes clamping load across a wider contact area, minimizing surface damage to clamped materials while dramatically enhancing anti-loosening and vibration-resistance capabilities.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M4~M8)
Length: 3/8"~4" (10mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

 

Truss Head

Truss Head

The Truss Head Screw’s extra-wide bearing footprint evenly distributes clamping forces, helping to minimize surface distortion, cracking, and material pull-through in thin sheet metal, plastics, and soft composite materials—eliminating the need for an additional washer.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M4~M8)
Length: 3/8"~4" (10mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

 

Pancake Head

Pancake Head

The Pancake Head Machine Screw features an ultra-thin, flat round head with gently rounded edges for an exceptionally low-profile finish. When installed, the head sits nearly flush with the surface, minimizing protrusion and helping to reduce surface indentation while maintaining a clean, streamlined appearance.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M4~M8)
Length: 3/8"~4" (10mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

 

Flat Countersunk Head

Flat Countersunk Head

The Flat Countersunk Head fastener features a precisely angled countersunk head designed specifically for applications requiring a completely flat, non-obtrusive surface profile.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M4~M8)
Length: 3/8"~4" (10mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.