scroll down

Self-Tapping Screw

Self-Tapping Screw

Self-Tapping Screw

Self-drilling screw fasteners from Taiwan combine precision engineering with superior functionality for professional building applications. These advanced fasteners feature an integrated hardened drill point that penetrates materials without pre-drilling, streamlining installation and reducing labor costs.

Head Style

Bugle head
Flat Countersunk head

Hex washer head
Hex washer head+Bonded washer
Pan head
Pan framing head
Wafer head
Trim head
Truss head

Surface

Zinc
Yellow Zinc
Phosphated
Ruspert
Customize coating

Size&Length

#6~#14 X 3/8"~6"
(M3.5~M6.3 X 9.5mm~150mm)

Standard:

IFI, ANSI, ASTM, DIN, AS3566

 

Able to manufacture according to the customer's drawings and requirements. Please refer to the respective tabs for more information.

Hex Washer Head

Hex Washer Head

The Hex Washer Head integrates the high-torque drive capability of a standard hex head with an integrated washer bearing surface. This structural design effectively distributes clamping load across a wider contact area, minimizing surface damage to clamped materials while dramatically enhancing anti-loosening and vibration-resistance capabilities.

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Point type: Self Tapping Screw
Twinfast Point
Type 17
Gimlet point Type 17
etc
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M3.5~M8)
Length: 3/4"~6" (19mm~150mm)
Or More 

 

 

Able to manufacture according to the customer's drawings and requirements.

Hex Washer Head With Bonded Washer

Hex Washer Head With Bonded Washer

The Self-Tapping Screw with PVC or bonded washer, designed for use on painted roof and wall panels. Each screw comes with either a PVC or bonded washer for enhanced sealing and durability, making them ideal for construction and industrial applications.

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Ruspert
Washer:Bonded washer
EPDM washer
PVC washer
Point type: Self Tapping Screw
Twinfast Point
Type 17
Gimlet Point Type17
etc
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M3.5~M8)
Length: 3/4"~6" (19mm~150mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Hex Washer Head With Stainless Steel Cap

Hex Washer Head With Stainless Steel Cap

Stainless Steel Cap technology is an advanced fastener protective solution specifically engineered for severe outdoor and highly corrosive environments. Through precision mechanical capping process, a high-grade stainless steel shell is permanently encapsulated over the carbon steel screw head.

This Screw works in synergy with premium EPDM sealing washers (or bonded washer, PVC washer) to provide heavy-duty clamping, and watertight sealing performance.

Specifications:

○Screw Cap

Material:Stainless Steel 

 

○Self-drill Screw

Material:Carbon Steel
SurfaceZinc
Yellow Zinc
Ruspert
Washer:Bonded washer
EPDM washer
PVC washer
Point type:Self Tapping Screw
Twinfast Point
Type 17
Gimlet point Type 17
etc
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#12~1/4 (M5.5~M6.3)
Length: 3/4"~6" (19mm~150mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Flat Countersunk Head

Flat Countersunk Head

The Flat Countersunk Head fastener features a precisely angled countersunk head designed specifically for applications requiring a completely flat, non-obtrusive surface profile.

Recess: Phillips / Trox

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Point type: Self-Tapping Screw
Type 17
Type F
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M3.5~M8)
Length: 1/2"~6" (13mm~150mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Pan Head

Pan Head

Pan head screws are exceptionally versatile and ideal for general machinery and structural assembly where countersinking the screw head flush with the surface is not required.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~5/16 (M3.5~M8)
Length: 3/8"~6" (9.5mm~150mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Pan Framing Head

Pan Framing Head

The Pan Framing Head Screw features a broad, flat bearing surface and an optimized low-profile head, engineered specifically for metal framing applications. The ultra-low head profile minimizes surface protrusion, allowing drywall panels and exterior cladding to sit flush against the framed structure for a clean, smooth finish.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6、#7 (M3.5~M3.9)
Length: 3/8"~1/2" (9.5mm~13mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Trim Head

Trim Head

Engineered for precision woodworking and architectural trim applications where aesthetic seamlessness is paramount, the Trim Head Screw features a significantly reduced head diameter compared to standard countersunk fasteners. This compact profile allows the head to sink effortlessly into the material with a minimal footprint, drastically minimizing the risk of edge splitting in delicate woods or composite boards. The resulting tiny countersunk recess can be easily filled, painted, or plugged for a virtually invisible finish.

Recess: Trox / Square / Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Ruspert
Point:Self-Tapping Screw
Type 17
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#8~10 (M4.2~M4.8)
Length: 1-1/2"~4" (38mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Truss Head

Truss Head

The Truss Head Screw’s extra-wide bearing footprint evenly distributes clamping forces, helping to minimize surface distortion, cracking, and material pull-through in thin sheet metal, plastics, and soft composite materials—eliminating the need for an additional washer.

Recess: Phillips

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Phosphated
Ruspert
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#6~1/4 (M3.5~M6.3)
Length: 3/8"~4" (9.5mm~100mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.

Wafer Head

Wafer Head

Recess: Phillips

The Wafer Head (frequently referred to as a Modified Truss Head) features an ultra-low profile head geometry combined with an oversized, extra-wide bearing surface. Its expanded underside distributes clamping loads over a broader area, providing high holding power while preventing thin sheet metal, plastics, or soft substrates from surface distortion or pull-through.

Specifications:

Material:Carbon Steel
Stainless Steel
SurfaceZinc
Yellow Zinc
Ruspert
Point: #2、#3
Standard:IFI, ANSI, ASTM, DIN, AS3566
Or More 

 

Dimensions: 

Diameter:#8 (M4.2)
Length: 1/2"~3" (12mm~75mm)
Or More 

 

Able to manufacture according to the customer's drawings and requirements.