Self-Drilling Screw
Self-Drilling Screw
Self-drilling screw fasteners from Taiwan combine precision engineering with superior functionality for professional building applications.
These advanced fasteners feature an integrated hardened drill point that penetrates materials without pre-drilling, streamlining installation and reducing labor costs.
Head Style | Bugle head |
Surface | Zinc |
Size&Length | #6~#14 X 3/8"~6" |
Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
Able to manufacture according to the customer's drawings and requirements. Please refer to the respective tabs for more information.
Bugle Head
Featuring a uniquely curved, trumpet-like bevel design, the Bugle Head optimizes clamping pressure distribution across the material surface. During installation, the smooth underside allows the screw to countersink seamlessly without tearing the drywall paper layer or splitting wood fibers, delivering a clean, flush finish that significantly reduces post-installation patching and finishing time.
Recess: Phillips
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Point: | #2、#3 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6~#10 (M3.5~M4.8) |
| Length: | 3/4"~4" (19mm~100mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Hex Washer Head
The Hex Washer Head integrates the high-torque drive capability of a standard hex head with an integrated washer bearing surface. This structural design effectively distributes clamping load across a wider contact area, minimizing surface damage to clamped materials while dramatically enhancing anti-loosening and vibration-resistance capabilities.
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Point: | #1~#5 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6~5/16 (M3.5~M8) |
| Length: | 3/8"~6" (9.5mm~150mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Hex Washer Head With Bonded Washer
The Self-Drilling Screw with PVC or bonded washer, designed for use on painted roof and wall panels. Each screw comes with either a PVC or bonded washer for enhanced sealing and durability, making them ideal for construction and industrial applications.
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Washer: | Bonded washer EPDM washer PVC washer |
| Point: | #1~#5 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6~5/16 (M3.5~M8) |
| Length: | 3/4"~6" (19mm~150mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Hex Washer Head With Stainless Steel Cap
Stainless Steel Cap technology is an advanced fastener protective solution specifically engineered for severe outdoor and highly corrosive environments. Through precision mechanical capping process, a high-grade stainless steel shell is permanently encapsulated over the carbon steel screw head.
This Screw works in synergy with premium EPDM sealing washers (or bonded washer, PVC washer) to provide heavy-duty clamping, and watertight sealing performance.
Specifications:
○Screw Cap
| Material: | Stainless Steel |
○Self-drill Screw
| Material: | Carbon Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Washer: | Bonded washer EPDM washer PVC washer |
| Point: | #2~#5 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #12~1/4 (M5.5~M6.3) |
| Length: | 3/4"~6" (19mm~150mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Hex Washer Head Painted Head
Custom Color-Matched Finish: Seamless Aesthetic Integration with Superior Weather Resistance
Painted Head Fasteners combine precision-engineered screws with durable, high-adhesion powder coating or wet paint technologies, designed for architectural applications where both visual seamlessness and weather durability are critical. Custom-matched to panel colors, the finished head blends effortlessly into colored metal sheetings, sidings, and architectural trims for a concealed visual appearance.
This Screw works in synergy with premium EPDM sealing washers (or bonded washer, PVC washer) to provide heavy-duty clamping, and watertight sealing performance.
Specifications:
| Material: | Carbon Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Painted Head | Customize coating |
| Washer: | Bonded washer EPDM washer PVC washer |
| Point: | #1~#5 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6~5/16 (M3.5~M8) |
| Length: | 3/4"~6" (19mm~150mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Flat Countersunk Head
The Flat Countersunk Head fastener features a precisely angled countersunk head designed specifically for applications requiring a completely flat, non-obtrusive surface profile.
Recess: Phillips
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Point: | #1~#5 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6~5/16 (M3.5~M8) |
| Length: | 1/2"~6" (13mm~150mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Flat Countersunk Head with Wing
The special design of the end of the drill point allows the self-drilling screw to integrate three functions: "Drilling", "Tapping" and "Locking" on one screw. And the drilling screw with wings improved the chip removal function and heat generation when drilling. With this screw, the connection of thick wood and steel can be completed at once.
Recess: Phillips / Trox
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Ruspert |
| Point: | #2~#5 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6~1/4 (M3.5~M6.3) |
| Length: | 3/4"~6" (19mm~150mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Pan Head
Pan head screws are exceptionally versatile and ideal for general machinery and structural assembly where countersinking the screw head flush with the surface is not required.
Recess: Phillips
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Point: | #1~#3 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6~5/16 (M3.5~M8) |
| Length: | 3/8"~6" (9.5mm~150mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Pan Framing Head
The Pan Framing Head Screw features a broad, flat bearing surface and an optimized low-profile head, engineered specifically for metal framing applications. The ultra-low head profile minimizes surface protrusion, allowing drywall panels and exterior cladding to sit flush against the framed structure for a clean, smooth finish.
Recess: Phillips
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Phosphated Ruspert |
| Point: | #2、#3 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #6、#7 (M3.5~M3.9) |
| Length: | 3/8"~1" (9.2mm~25mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Wafer Head
The Wafer Head (frequently referred to as a Modified Truss Head) features an ultra-low profile head geometry combined with an oversized, extra-wide bearing surface. Its expanded underside distributes clamping loads over a broader area, providing high holding power while preventing thin sheet metal, plastics, or soft substrates from surface distortion or pull-through.
Recess: Phillips
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Ruspert |
| Point: | #2、#3 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #8 (M4.2) |
| Length: | 1/2"~3" (12mm~75mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Extra Flat Countersunk Head
Designed for space-constrained assemblies and ultra-flush applications, the Extra Flat Countersunk Head features an exceptionally thin head profile that sits closer to the material surface than standard countersunk screws. Even when used with thin metal sheets or shallow countersunk holes, the low-profile design helps minimize head protrusion, reducing surface clearance issues while maintaining a clean, flush appearance.
Recess: Phillips
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Ruspert |
| Point: | #2、#3 |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #8~#10 (M4.2~M4.8) |
| Length: | 3/4"~1-1/4" (19mm~32mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.
Earge Flat Head w/8 Nibs
Recess: Phillips
Specifications:
| Material: | Carbon Steel Stainless Steel |
| Surface | Zinc Yellow Zinc Ruspert |
| Point: | Spoon Point |
| Standard: | IFI, ANSI, ASTM, DIN, AS3566 |
| Or More |
Dimensions:
| Diameter: | #8 |
| Length: | 1-1/4"~2-1/4 (19mm~32mm) |
| Or More |
Able to manufacture according to the customer's drawings and requirements.